Supported Operating Systems (standalone installation)

The following operating systems are supported for standalone installation:

Supported Application Servers

The following are supported Application Servers for deployment of XpoLog as an application (requires JAVA 1.6+):

Note:  XpoLog is known to run on additional application servers. However, it was tested only on the above servers.


JAVA 1.6 or later is required. JAVA 1.7 is recommended.

Supported Browsers

The following browsers are supported:

Required Ports

The following are the default ports which should be opened:

Hardware Recommendations



The following is hardware recommendation for up to 3 concurrent users, and < 2 GB of daily logs volume:


The following is hardware recommendation for up to 5 concurrent users, and < 10 GB of daily logs volume:



The following is hardware recommendation for up to 25 concurrent users, and higher daily logs volume:
(contact to determine if a cluster is needed. More information about clustering can be found here. See installations details at XpoLog Cluster Installation)


XpoLog collection, index and search operations benefit from a disk subsystem that is designed to the system's needs.

Capacity: Generally, the total required storage is calculated based on [DAILY AVERAGE LOG] x [RETENTION POLICY] x 1/2
The required storage for standard application logs may be closer to 35%. It is possible to tune the indexing density to reduce the required storage down to 15%.

ArchitectureRAID 0, 10, 01, 0+1 will give the best performance, while RAID 5 will offer the worst performance.

Performance: XpoLog does many bulk reads/writes and many disk seeks. We recommend storage that provides high number (1000+) of random input/output operations per second (IOPS).

Note: In Linux/Solaris standalone installations, it is recommended to allocate a high number of open files and processes to the user that runs XpoLog.
For more information please see Post Installation Recommendations or 
contact for more details